Nova35

Release Time：2019/07/01 products Browsing Times：18384

原价：￥20000现价：￥1000

The NOVA laser cutter carries all the best functions like servo motor and excellent engraving quality with high resolution etc.Users can also choose RF tube to reach an even higher cutting and engraving quality.And we also add much more user friendly designs to this excellent series.

contact

know more

Standard Features

Hybrid servo motor 1000mm/s speed for engraving photo, super smooth vector cutting quality.

Smart board Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving

Laser software RDWorksV8 laser software.

LCD panel Set speed, power, and more directly from the LCD panel.

Auto focus Help the user to set focus Easier. (based on motorized table)

Motorized table Control the table up/down from LCD panel directly

Honey comb table Reduces underside reflections.

Aluminum blade cutting table Reduce the influence of the reflection of laser.

3D Engrave Engrave high quality 3D photos directly.

3D cutting Achieve “3D cutting” on some materials

Parameter library Help you to save times.

Color mapping Change the working speeds and power by using color settings.

Visible Red Dot Pointer Make the laser beam “visible”.

High quality laser tube Every laser tube must pass the strict quality control test.

High quality optics High quality optics.

Mirror mount Thunderlaser easily re-adjusting 3D mirror mounts.

Connection ways High-speed Ethernet line or the USB cable line.

USB disk interface Thunder laser system supports the USB disk loading.

Free Home position Freely change the starting position.

Large buffer memory You can take the file directly from the memory.

Emergency stop Turn off the machine immediately when there is an accident.

Open flap protection Laser will stop working if you open the front cover.

Water protection Laser will stop working if the water cooling system is not working

Alarm Lamp Show the work state and tell when the job is done, more safe for you.

Standard laser head It is the most often used head.

Air assist Blowing air to prevent the material being burned

The strong machine case Improve the laser machine performance.

Exhaust system Ensure the work pieces and laser cutter machine inside be clean.

Drive belts This belt is stable performance with long life, wearable and durable.

Low-noise cooling fan Operate the laser in a quiet and comfortable surroundings.

High quality rails Keep the engraving/cutting precise and very durable.

Technical Specifications

Laser System		NOVA 35	NOVA 51	NOVA 63
Laser Tube Wattage		80-130Watt	100-130Watt	100-150Watt
Work Area		900x600mm(35.4″ x 23.6″)	1300x900mm(51.2″x35.4″)	1600x1000mm(63.0″x39.4″)
Max Part Size (WxLxH)	Front door closed	1000x730x230mm(39.4″ x 28.7″ x9.0″)	1400x1030x230mm(55.1″ x 40.6″ x9.0″)	1700x1130x230mm(66.9″ x 44.5″ x9.0″)
	Pass-through door	1000x∞x20mm(39.4″ x ∞” x0.8″)	1400x∞x20mm(55.1″ x ∞” x0.8″)	1700x∞x20mm(66.9″ x ∞” x0.8″)
Table Size		1000x730mm(39.4″ x 28.7″)	1400x1030mm(55.1″ x40.6″)	1700x1130mm(66.9″ x 44.5″)
Z Axis Height		230mm(9.1″)	230mm(9.1″)	230mm(9.1″)
Dimensions(WxDxH)		1500x1105x1040mm(59.1″ x 43.5″ x40.9″)	1900x1405x1040mm(74.8″ x 55.3″ x40.9″)	2200x1505x1040mm(86.6″ x 59.3″ x40.9″)
Net Weight		310kgs(683lbs)	430kgs(948lbs)	470kgs(1036lbs)
Laser Type		Sealed Co2 Glass Laser Tube
Cooling		Water Cooled
Motion Control System		High-Speed Hybrid servo motor
Maximum Speed		1000mm/S(39.4 IPS)
Speed and Power Control (engraving depth)		Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster, vector, and combined mode
Resolution(DPI)		User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)
Computer Interface		Ethernet and USB Connection
Compatible Operating Systems		Windows XP/2000/Vista/7/8/10
Buffer Memory		128MB Standard
Display Panel		3.5″ LCD panel showing current file, total working time, laser power, speed etc.
Electrical Requirements		110 to 240 volts, 50 or 60 Hz, single phase
Ventilation System		Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.
Standard Features		Red dot pointer, Auto focus, Motorized table, Pass-through Door, Air Assist, Water pump ,Exhaust fan, HoneyComb Table, 2″ (50.8 mm) Focus Lens, Easily adjustable Home position, LCD Display,3D Engraving ,”No water” protection, Emergency stop, Maintenance mode, Open cover protection,Hybrid servo motor
Optional Features
High Resolution Head		Increase the resolution up to 1000DPI
Rotary Axis		Use to engrave on round items
Water Chiller		Improve the cooling of laser tube

Machine Size

Optional Items

Water Chiller When the laser tube is working, it will produce a large amount of heat.Since the water chiller has the refrigerating capacity and can adjust the temperature intelligently to keep the temperature within a certain range, there by to ensure the stability of laser working.

Rotary Axis Rotary engraving equipment was used to extending THUNDERLASER system application, as a optional component, It can be used for cutting and engraving round items…

Heat Alarm Detector A thermal detector is designed for areas where a fire will be more flame and heat than smoke; areas such as laser cutter and engraver, kitchens, garages and workshops. The small thermal heat detector will also have a 10 year, long life battery…

HR laser head We named Hight-Resolution head as HR head for short,it’s made by special structure for focusing the laser bean into a much smaller dot,thus we can get more tiny laser dots in a unit area,and the engraving result will be more elaborate…

4″ laser head 4″ laser head owns a longer focal distance than 2″ standard head, thus for cutting thick material, it makes the cutting edge more smooth and straight…

Air compressor The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator…

Materials

If your material is not in the below list, our Applications Team would be happy to assist you to test it.

Materials	Engrave	Cut
Wood	√	√
Acrylic	√	√
Delrin	√	√
Cloth	√	√
Leather	√	√
Mat Board	√	√
Melamine	√	√
Paper	√	√
Mylar	√	√
Pressboard	√	√
Rubber	√	√
Wood Veneer	√	√
Fiberglass	√	√
Plastic	√	√
Cork	√	√
Corian	√	√
Twill	√	√
Anodized Aluminum	√	X
Painted Metals	√	X
Tile	√	X
Glass	√	X
Coated Metals	√	X
Ceramics	√	X
Marble	√	X
Stainless Steel	*	X
Brass	*	X
Titanium	*	X
Bare Metal	*	X

* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.

Video

Machine Guiding Video

How to choose a reliable laser cutter
WATCH NOW

▷ How to choose a reliable laser cutter
Machine Guiding Video

How to setup your nova laser cutter
WATCH NOW

▷ How to setup your nova laser cutter
Machine Guiding Video

DPES Sign Fair with Thunderlaser in 2016
WATCH NOW

▷ DPES Sign Fair with Thunderlaser in 2016
Machine Guiding Video

How to install HR head
WATCH NOW

▷ How to install HR head
Machine Guiding Video

Auto focus
WATCH NOW

▷ Auto focus
Machine Guiding Video

How the Mars Motorized table works
WATCH NOW

▷ How the Mars Motorized table works

the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube) https://www.thunderlaserthai.com/how-to-use-your-laser-machine/how-to-setup-your-mini60-laser-system.html https://www.thunderlaserthai.com/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cutter.html

9.How much time do I need to spend on learning how to run the laser machine?

As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too. https://www.thunderlaserthai.com/video/what-laser-cutter-can-create.html https://www.thunderlaserthai.com/video/how-to-use-your-laser-machine.html https://www.thunderlaserthai.com/video/how-to-use-your-laser-software.html