![Thunder Laser successfully wrapped up its tour to Tech Industry 2019 Thunder Laser successfully wrapped up its tour to Tech Industry 2019](https://www.thunderlaserthai.com/wp-content/uploads/2019/12/litaowan3-300x300.jpg)
Thunder Laser successfull…
Release Time:2019/06/01 laser cutter machine Browsing Times:862
Here are the reasons:
● The needed focus is lost
● The focus lens and reflective mirror are dirty
● The laser beam path is not aligned
1. Mirror alignment;
When the laser head move to four corners of the working table, check if the laser beam lasers to the same position on the third reflective mirror.
2. Vertical alignment;
When the laser head moves to four corners of the working table, check if the laser beam can vertically go through the 10mm acrylic.
Please check laser beam path according to the video below.
https://www.thunderlaserthai.com/how-to-use-your-laser-machine/how-to-adjust-the-laser-beam-path.html